Hollis Prism 2 TEC CCR 60 Qualifier Course

PADI CCR60 Hollis Prism 2 Rebreather Qualifier course

Already a Hollis Prism2 CCR 40 ( mod 1 ) diver on the Hollis Prism 2 and want to go deeper for longer and get even more fun out of your Hollis Prism 2?

Then the PADI CCR 60 Diver course is for you.

This is the second level of technical diver training PADI offer for the Hollis P2.

After you complete the Tec 60 CCR course, you will be qualified to extend your CCR diving adventures down to a maximum depth of 60 metres.

You will also learn to complete multiple decompression stops, manage life-support problems and dive with trimix/heliox as a diluent instead of just air.

It’s a considerable challenge, but if you’re serious about being a tec CCR diver, then this course is the next step in becoming a tec CCR diver.

This course takes you from knowing how to fly your PRISM 2 like a Boss to Learning how to overcome most mechanical problem that could occur while underwater.

We will cover the ins and outs of the Hollis Prism2 and more advanced procedures than what you learnt on the CCR40 Hollis Prism 2 course..

We will cover both the front ( FMCL ) and back mounted counter lung ( BMCL ) versions of the CE Hollis Prism 2.

And have great of fun while learning lots.

Hollis Prism 2 Rental units are available from us for this course.


Tec CCR Qualifier Hollis Prism 2

As a qualified Tec CCR 40 or equivalent, Tec CCR 60 or Tec CCR 100 Diver you qualify to dive on a specific Type T CCR such as the Prism 2, JJ or AP inspiration. To dive on a different CCR, you must qualify on that unit by participating in a Tec CCR Qualifier program. These normally take 2-3 days to complete. During the qualifier program, you’ll focus on what is new about the Hollis Prism 2 CCR – including assembly, predive checks, disassembly and unique aspects of diving the P2 versus other CCRs you’ve already qualified to use. You will complete one confined water dive and two or three open water dives to ensure that you're comfortable with the new CCR. When you complete the program, you earn a new certification card for the levels you have completed on the Hollis Prism2.

Who is the Hollis Prism 2 CCR 60 course for

This course is aimed at experienced CCR 60 divers on another type T CCR or those with equivalent certifications from another CCR diver training agency who are also already quailfied on the Hollis Prism 2 to CCR 40 or equivalent.

The PADI CCR Certification path does not stop at PADI CCR 60 - 60m Deco Trimix Diluent

We also have following

PADI CCR 100 - 100m Deco Trimix Diluent

For another Type T CCR diver we have the 

PADI CCR 100 Qualifier - 100m Deco Trimix Diluent

What qualifications do I need for this Hollis Prism 2 CCR Diver course

To take a PADI CCR 60 Diver Qualifier course, you must

  • Be a Tec PADI CCR 40 Diver qualified on the Hollis Prism 2 CCR or eqivalent.
  • Be a Tec PADI CCR 60 Diver qualified on another Type T CCR or eqivalent.
  • Have logged a minimum of 150 dives, with at least 25 dives and 50 hours experience diving the Hollis Prism 2 CCR with an offboard bailout system following Tec 40 CCR Diver principles..
  • Have at least 25 dives and 50 hours experience diving the Hollis PRISM2 with an offboard bailout system following Tec 40 CCR Diver principles.
  • Have at least 10 logged CCR dives deeper than 30 metres/100 feet.
Copyright © 2013-present Rebreathers UK. All rights reserved.